Cylindrical Chamber Vacuum Oven

About me

Vacuum oven manufacturers in Bangalore

Global Vacuum products offers high quality, compact, yet versatile vacuum ovens at economical prices. With temperature capabilities ranging from ambient to 600°C, and incorporating any degree of vacuum environment from atmosphere to 10 -8 mbar, the Vacuum ovens offer wealth of possibilities.

The Vacuum ovens have a chamber that is a “Hot Wall” design, which allows full utilization of the inside of the vacuum chamber, maximizing the load capacity. With up to a 4 ̎ thick, high temperature insulation with reflective shield surrounding its heater bank, the vacuum ovens maintain a stable processing temperature inside the chamber at all times. This series of vacuum ovens offer standard inert gas fill and vent valves allowing for various types of part processing using a gas back-fill environment. With the standard touch screen PLC the operation of the system is fully automated with data logging of the process parameters. Vacuum ovens incorporate removable back plates to accommodate optional double door modification. This enables easy connection and interface with other processing equipment,such as either end of an inert gas environment (glove box) system for pass through applications.

The Global Vacuum ovens feature several standard models with many options available, making it simple to control your process and its cost. Add the automated control package and create automatic processing cycles which enable an operator to simply load the vacuum ovens, and then push the cycle start button.

Temperature Capabilities

  • 03 series : 350°C
  • 06 series :600 °C

Time to temperature

  • 25 minutes under vacuum
  • 35 minutes in atmosphere
  • Vacuum Pumping Systems

    • Basic 7, 11 or 23.3 cfm two-stage mechanical pump packages all with a valve, pump start switch and 0-1000 micron vacuum gauge installed
    • Upgraded pumping systems-Mechanical, dry, diffusion, cryogenic, and turbo-molecular
    • Mechanically refrigerated , optically dense cold trap in roughing line or Liquid nitrogen trap in high vacuum line (for prevention of hydrocarbon contamination)
    • Automated control system with heat control and backfill
    • Vacuum Ranges

      • Mechanical Pump, Standard-atmosphere to 35 microns
      • Dry Pump (oil free) - atmosphere to 35 microns
      • Mechanical/ Diffusion Pumps – atmosphere to 1.0× 10 -6 torr
      • Mechanical / Cryo Pumps- atmosphere to 1.0×10 -7 torr
      • Mechanical / Turbo Pumps - atmosphere to 1.0×10 -7 torr
      • Operating Pressure Range

        • Atmosphere to 10 -8 torr
        • Working pressure at maximum temperature : 10 -8 torr to 1 atmosphere
        • System Controls

          • Color Touch Panel Operator Interface. PLC allows programmable ramps and soaks, vacuum set points, gas back fills, and automatically executes system overhead functions such as pump downs and vents. Capable of data logging.
          • +/- 1 degree controllability
          • Active graphic vacuum map with instant overview of valve status and vacuum pump conditions
          • Programmable digital set point temperature control
          • Independent programmable digital over-temperature control
          • Digital vacuum gauge with a readable range from atmosphere to .001 torr vacuum pressure
          • PLC controlled cycle timers and counters

          Available: Automated control systems

          • Full PC control system, utilizing PLC, PC and HMI software technology. The system affords superior data aquisition and archiving capabilities.
          • Multiple survey thermocouples

          Inert Gas System

          Standard Inert gas inlet and vent valve for gas processing applications such as backfill and venting

          Available: Closed-loop, multi-channel upstream gas flow control with downstream pressure control


          • All Stainless steel construction
          • Optional second door on opposite side for pass thru capabilities such as attachment to a dry/glove box and/ or to any other controlled environment enclosure
          • Special shelving arrangement option available
          • Optional water cooling of vacuum chamber walls for quick cooling

          Available work zones

          800 Series 11.5 ̎ Dia× 14 ̎ Deep 0.84
          1200 Series 17"Dia X 24"Deep 3.15
          • Cylindrical Hot wall chamber configuration consists of insulated resistive heater bank attached to the exterior of the chamber
          • Working pressure: Atmosphere to 10 -8 torr


          • Chamber and controls are enclosed in a mild steel epoxy, enamel covered enclosure
          • All models available in clean room compatible configurations or in all-stainless steel enclosures

          Safety Features

          All Global Vacuum products, Inc. products are equipped with standard safety features to ensure safe operation